3192 Posts
You will find in this topic short explanations for some of the settings available using credits as well as a few ideas to optimise the workflow.

Camera Position
To change the position of the camera, tick the box Lock Camera to View. The camera will follow the viewport.

Depth of Field
Use the picker tool located next to the distance field to select a part in the viewport. All the parts in the scene located at the same distance will remain sharp. The sharpness of the other pieces will depend on the distance to the focus point and the aperture radius parameter. Select a small radius to slowly blur the parts when they get further from the focus point. Increase the radius to increase the blur power. Generally radius values between 0.5mm and 5mm are acceptable depending on your distance and what you try to achieve. Remember to re-use the picker tool every time you change the camera position as the distance changes.
See more information about the depth of field on wikipedia.

Part defects
Three options are provided to increase the photorealism: Wear & Tear, Discolouration and Flatness Distorsion. Keep in mind that updating any of these options will increase the render time. My preferred values are: Wear: 25%, Colour Shift: 10% and Uneven Flatness activated. You can decrease the wear parameter to 10% if you want to get a cleaner look.

This value randomises the location and the rotation of the parts to mimic an assembly made by a real person - Parts would not be fully pushed and not perfectly aligned. With high values, some parts may intersect.

Contrast, Brightness, Hue and Saturation are pretty self explanatory and similar to any image processing software. As a personal preference, I like pushing the saturation 1.05 or 1.1

Dispersion definition in the Blender documentation is as follows:
This simulates chromatic aberration, where different wavelengths of light refract slightly differently, creating a rainbow colored fringe.
Very low values shall be selected. I generally set this parameter to 0.02 or even lower.

Fog Glow is sort of an atmospheric haze around the image. Set anywhere between 0 and 100% depending on the mood you wish to recreate.

Vignette parameter creates a black halo in the corners of the image. More information on wikipedia.

To know:
- The circular floor is rendered with blurred edges so don't hesitate to make it big.
- For square floor, you can choose to make it a shadow catcher. Only shadows casted by the plan will be rendered. The plan itself won't appear. This is a good option to use with a coloured background. Increase the roughness to 50 to 100% to avoid really sharp edges for the shadows.
These options are also available for free renderings.

What I recommend for a preview image before launching the final render is to use the percentage field in the render tab. This field directly impacts the width and height of your image that can still contain your desired final resolution. If you use 50%, the render height and width will be divided by 2 and the render time divided by 4.

Don't hesitate to reduce the sample size. Divide the value by 2 and the render time will be divided by 2. For testing, I would use a value between 50 and 100 samples.

Deactivate all part defects. This is generally not critical to preview the scene and the render time will be almost divided by 2.

Remember that the cost of the render is directly related to the render time and if you follow the advice above, the preview image will cost you a couple of cents.
13 Jan 2018, 21:39
Edited 24 Jan 2018, 02:30
69 Posts
Thank you for the quick tutorial/explanation! Yesterday I also made some testing and for the test render I set the resolution to 1920x1080, and to 20%, and the samples to 32, like I use it in Blender. It looked fine for a test image - I saw the necessary effects that I wanted to use, like vignette, DOF, and compositing effects, but I only payed $0.005, so half cent.
14 Jan 2018, 07:16
3192 Posts
14 Jan 2018, 07:26
14 Posts
Thanks for the tuto
It will be a lot easier to use the render farm now!
14 Jan 2018, 10:07
3192 Posts
Updated with camera and new floor settings information.
17 Jan 2018, 10:57
5 Posts
Hi, what are settings for 2k resolution? Thanks in advance.
30 Mar 2018, 17:50
532 Posts
@Turklegofan, 2048x1080
31 Mar 2018, 09:34
5 Posts
Thank you
3 Apr 2018, 08:14
71 Posts
Hello, Scrubs. I have a couple questions. Firstly, what's the difference between "Strength" and "Strength"? And secondly, what is volume emission?

I think that would be great if this guide were updated; many new features have since been added.
31 Jul 2018, 04:47
Edited 31 Jul 2018, 04:48
3192 Posts
I guess, you talk about the lighting tab?
Rotation and Strength #1 are related to to the HDR Image.

Then Volume Emission and Strength #2 apply to the selected transparent material above. To make it simple, when Volume Emission is ticked for a material, all parts in the scene with this material will be glowing.
31 Jul 2018, 05:28
71 Posts
Ah, I see. Thanks
31 Jul 2018, 16:01
71 Posts
Hello again
It would be nice if you updated this tutorial to include how to use different types of lamps.
21 Nov 2018, 23:57
4 Posts
Hello! I am frenchfry207 and I'm having an issue with rendering my project.

I made a model and I decided to add some lights and backgrounds. However, when I render it, I only get the background instead of my model. Am I doing something wrong or is it a bug?
8 Jul 2019, 20:50
3192 Posts
Hello, Make sure that your render camera is set properly. If it is not the issue please attach a screenshot of your viewport with the settings.
8 Jul 2019, 21:04
4 Posts
I issue is fixed thank you for your help!
8 Jul 2019, 21:20
102 Posts
If you get the HD minifigure. Can you use it in the Mecabricks workshop? And add the scratches, dents, and stuff. Or is it only for Blender?
10 Jul 2019, 17:53
Edited 10 Jul 2019, 17:54
3192 Posts
The minifigure from the shop is only for use in your external 3D software like Blender. This option is also available in the render mode by ticking the HD Minifigure checkbox in the part tab.
10 Jul 2019, 20:10
102 Posts
Alright. Thanks!!!
10 Jul 2019, 21:36
36 Posts
@Scrubs: How do I get the settings like HD Minifigure, and the other settings that are locked and highlighted red?
20 Dec 2019, 19:04
3192 Posts
By buying and using credits (use credits checkbox in the render panel)
20 Dec 2019, 19:32
Page 1 of 2