1 Post
How can I buy my own greation or see all the parts?
28 Sep 2017, 16:49
76 Posts
If your creation is public, then when viewing it in the Library, you can click on the "Inventory" tab below your model to get the list of parts. From there, you can download the Bricklink XML file and upload that to Bricklink to create a wanted list, and from there purchase the parts.
28 Sep 2017, 18:42
561 Posts
As Ricecake mentioned, you can use Bricklink to buy the bricks.
You can use this page for importing: https://www.bricklink.com/v2/wanted/upload.page?utm_content=subnav
Use the downloaded BrickLink file (copy and paste this) in the provided textbox on the right side of the screen.

This feature on Mecabricks isn't up-to-date. Sometimes, the import page will throw unknown parts. You can report these, and we will get it fixed. It's an ongoing work as everything on here.

There are 3 errors on the import of your set "nice". I've already went ahead and identified and reported them. They'll get fixed soon and you'll be able to purchase the full set through BrickLink.

After that, you can go the "buy" page and selected the imported wanted list.

93551,,1,141,"Earth Green","Mini palet",,"Minifigures - Accessories In Hand" => BrickLink ID: 93551
42534,42534,2,199,"Dark Stone Grey","Plate 8X8","Plate 8 x 8",Plates => BrickLink ID: 41539
44237,44237,1,25,"Earth Orange","Brick 2X6","Brick 2 x 6",Bricks => BrickLink ID: 2456
29 Sep 2017, 17:21
Edited 29 Sep 2017, 17:22
3 Posts
How do I make my creation public?
21 Dec 2017, 16:01
485 Posts
In you own library(click on your username in the upper right corner) just double click on your creation and the you can change "Open to the public".
21 Dec 2017, 18:26
1 Post
it won't let me proceed
15 Feb 2019, 03:48
485 Posts
@willsanator11isbeastzach, I think you need to be a little more specific about your problem, what are you trying to do?
15 Feb 2019, 06:50
16 Posts
bricklink xlm does not work on bricklink. It says it is not supported.
13 Aug 2019, 13:41
3113 Posts
You need to copy and paste the content of the file.
13 Aug 2019, 20:48
16 Posts
18 Aug 2019, 19:06
16 Posts
19 Aug 2019, 13:09
16 Posts
it won't let me paste at ALL! It is so weird.
19 Aug 2019, 13:10
10 Posts
I can't even copy, let alone paste. I am trying to build an apocalyptic vehicle/tank, and I want to C&P the treads.
23 Oct 2019, 16:19
152 Posts
You cannot copy and paste in 3D, press d to make another copy of the part.
25 Oct 2019, 05:26
Edited 25 Oct 2019, 05:26
1 Post
how do i see my bricks
3 Jan 2020, 21:04
8 Posts
When I try to upload on BrickLink, it says the file isn’t supported
16 Apr 2020, 20:56
3113 Posts
Bricklink is weird. You shall copy and paste the content not upload the file.
16 Apr 2020, 21:03
12 Posts
I have the same problem as 194jj01 and Legoguy2006.
Check here for screenshots:

01: This is the csv file I get out of mecabricks.
02: If I copy+paste on bricklink, this is the error that I get.
03: This is the format that bricklink requests, that is totally different from what mecabricks gives me.

Is there anything I am doing wrong? Am I pasting to the wrong dialog in bricklink? I have found no other way to create wanted lists.
20 Apr 2020, 05:00
3113 Posts
The csv file is not for Bricklink. You shall use the bricklink file (Bricklink XML)...
20 Apr 2020, 05:18
Edited 20 Apr 2020, 05:19
12 Posts
I see, so it works only for public MOCs?

Edit: Thanks, worked now. I made my model public and followed the instructions by ricecake above.
20 Apr 2020, 09:33
Edited 20 Apr 2020, 09:53
Page 1 of 2